INVESTIGATE |
-
Introduction: I have written a brief paragraph, introducing the project. -
Problem: I have re-written it in my own words, and I understand it. -
AOI: I have written how and why solving this problem is relevant to the A.O.I.’s? -
Virtual Cork Board: I have researched similar solutions / designs. -
Mind Map: I have brainstormed, with a mind map, many different possible solutions to the problem. -
I have written down and discussed appropriate questions (at least 4) that will guide my investigation. -
Bibliography: I have properly maintained a bibliography cite appropriately. -
Design Brief: I have written a design brief, explaining what I am going to do to solve the problem. -
Design Specifications: I have written down design specifications which my product/solution must meet and a test to determine if they were met. |
DESIGN |
- I have included a variety of designs.
- I have explained all parts of my design/ solution .
- For explaining my designs, I have used many techniques like story boards, sketches, labelled diagrams with explanations etc
- I have evaluated each design critically against the design specification (questionnaire might be the easiest)
I have justified the selection of a particular design. - I have evaluated my performance in the design stage of the project.
|
PLAN |
- I have included a time line with Gantt chart ( Gantt chart should show planning and scheduling tasks over time )
- I have included a step by step plan ( How the project will be carried out )
- I have included evidence for my planning about material/tools and resources usage.
- I have tried to answer the following questions:
- Was the plan detailed enough and why?
- Could it be followed by someone else and why?
- Have I used all the resources available to me?
- I have critically evaluated my time plan.
- I have justified any modifications that seem necessary at this stage to my original design.
|
CREATE |
Make the product and show evidence of the following - I have made dated journal entries in my process journal.
- I have explained the tools and techniques used in the process of creation.
- I have included evidence in the creation phase that I have followed my time plan.
- I have justified any changes I made to my plan during the creation phase.
- I have included screen shots and other photographic evidences of the key phases of creation.
- I have made notes regarding any changes I made eg added a step, changed the order, changed the technique, used another resource, didn't need a resource, didn't finish what was planned etc..
- I have kept notes in my process journal about how well I worked, problems encountered, and use of time - to be used in the evaluation.
|
EVALUATE |
- I have included the feedback received from my testers /user in proper format.
- I have analyzed the results of questionnaires if any used for testing my product / solution.
- I have included a detailed evaluation of my own performance at each stage of the design cycle by discussing the strengths and weaknesses of each stage. I have included my observations on how each stage could have been improved.
- I have compared my predicted time plan with the actual and gave reasons for the changes
- I have included a discussion on the impact of my product on me, others and/or the environment.
|
ATTITUDES IN TECHNOLOGY |
- I have displayed enthusiasm, motivation and initiative in completing this project
- I have worked well both in class and outside the class
- I have met all the deadlines
|
0 Response to "Design Folder Checklist"